Warranty
Three warranties that work together
The material carries the manufacturer's warranty and the fitting carries ours. Both depend on aftercare — and that is the only thing we need from you.
- Kaitsekile · XPEL
10 aastat tootjagarantii
XPEL Ultimate Plus film carries a 10-year manufacturer warranty against yellowing, cracking, blistering and edge lifting. The warranty comes from the manufacturer and holds regardless of whether Stalla still exists.
- Yellowing and dulling
- Cracking and blistering
- Servade eraldumine
- Ceramic coating · Gtechniq and XPEL
Kuni 9 aastat kattegarantii
The Gtechniq CSU + EXO system carries a manufacturer warranty of up to 9 years, XPEL Fusion Plus Premium v2 of 5 years. Both require the vehicle to be maintained on the agreed schedule — including visits to us.
- Gtechniq CSU + EXO — kuni 9 aastat
- XPEL Fusion Plus v2 — 5 aastat
- EXO coating — 24 months
- Paigaldus · Stalla
10 aastat paigaldusgarantii
The manufacturer's warranty covers the material — we are responsible for the fitting. The Stalla fitting warranty runs for 10 years, provided the film is maintenance-washed at Stalla or at an official partner at least once every two months.
- Edge adhesion and cuts
- Air bubbles and creases
- Evenness and gloss of the coating
- Requires a maintenance wash every two months
- Esiklaasi kile · XPEL
1 year or 12,000 km
Windscreen protection film is a separate product with its own warranty terms: one year or 12,000 kilometres, whichever comes first. The windscreen takes the most stone chips and contamination, so it wears faster than bodywork film.
- Valid from the date of installation
- Does not affect visibility
Hoolduskava
What you need to do
Four things. We hand them over in writing with every job, so you do not have to remember them.
The first 7 days
Do not wash the car or leave it out in the rain. Film and ceramic coatings need time to cure — this period decides how long the result lasts.
Iga pesu
pH-neutral shampoo and hand washing. Avoid pressure washing the edges of the film — keep the nozzle at least 30 cm away and never aim it straight under an edge.
Every 6 months
We check the condition of the coating and refresh the top layer if needed. That keeps the manufacturer's warranty valid.
Kord aastas
A thorough inspection: the edges of the film, the hydrophobic performance of the coating and the state of the surface. Small things are cheap to fix before they become big ones.
Time for a service?
Book an inspection — we check the condition of the coating and keep the warranty valid.